The static power supply unit with separate voltage stabilization, protected against polarity reversal, overheat and short allows stable amplifier supply without capacitors.
Power Supply Unit (X1)
Power Supply Board Specifications:
· galvanic isolation of in-/output of the power supply unit, the feedback loop, TL431 reference-voltage source stabilizer;
· separate voltage regulation;
· minimal interference to a vehicle electrical system;
· Low-ESR electrolytic and film capacitors ensure high peak current and minimal interference
· protected from polarity reversal, short-time input voltage overlapping, the power supply unit overheating and short-circuit at the output;
· double-sided printed boards with 70 μm copper foil.
Specifications other than the above can be found here
Technical Specifications of Power Supply Unit*:
Output Power |
350 W |
Input Voltage |
in vehicle network (+12V) |
Output Voltage |
±26 V, +3.3 V |
Voltage ripple, max |
50 mV |
Reversal polarity protection |
Yes |
Short-time input voltage overlapping protection |
Yes |
Overheat control |
Yes |
Input Control On/Off (Remote) |
Yes |
* Our company follows the policy of continuous development and product improvement. Therefore technical specifications and amplifier construction can be changed without prior notification.
Please, visit our web store to purchase the introduced products.